Electric Generator JP 60E

VP60E

60Hz 1800rpm IP 120/240V

JP60E

Electric Generator JP 60E
Model
VP-50E
Power (ESP)kW/kVA56/70
Power (PRP)kW/kVA50/63
Nominal voltagev240
Rated CurrentA150
Rated Rotation Speedrpm1.800
Power PowerPhp0.8

STANDARDS

Generator: GB/T2820-2009, ISO8528
Alternator: VDE0530, NEMA MG 1-32, IEC34, AS1359
Diesel engine: ISO3046, DIN6271
Reserve Power: It continues to operate with variable load for the duration of an emergency. No overload is allowed at these ratings.
Main Power: It continues to operate on variable load for unlimited periods with a 10% surge available for 1 hour in any 12 hour period.

Frequency
Hz
60

Frequency

Hz

60

Fuel consumptionl/h8.3 (50%) 12.8 (75%) 16.6 (100%) 18.2 (110%)
Phase number Phase 1
Insulation Degree H
Post Number 4
Excitation mode self-excitation
Panel Type digital-panel
Performance Grade G3/G3
Noise Level (Db)OpenType
Silent Type
97 ± 2
67 ± 2

SETTING

Standard: Engine, alternator, cooling system, base frame (excluding fuel tank), shock absorber, air intake system, control box (including mains float charge), plastic fan blades (when engine and water tank do not bring).
Optional: Base frame (including fuel tank), jacket water heater, fuel water separator, fuel heater, fuel level sensor (only supporting underframe tank), switch box (with switch), ignition switch , water level sensor, engine anti-condensation heater, automatic fueling system (only supporting base frame including fuel tank), battery frame.                                                                                                                            Accessories: Silencer, bellows, exhaust silencing system accessory (with matching engine).

perkins engine

engine mode 11044D-44TG1
Type of motor 4 times; Online; 3 cylinder Diesel
air inlet shape naturally aspirated
cylinders 4
cylinder diameterhmm15
strokehmm127
DisplacementL4.4
rated powerKW/HP60/82
compression ratio 17 25:1
Fuel system Direct Electric Injection
Refrigeration system water cooling
Lubrication system splash pressure
Start System Electrical start
Fuel type Confirm to USA Fed Off Highway
Lubricating oil brand 15W40-CH4 Update
Cooling water capacityL8.0L
Lubricant capacityL12.6L
voltage statevDC12V

Alternator

Alternator Manufacturer Stamford
Alternator ModelICU 224D
Control system AVR
insulation system ClassH
Protection IP44
Rated power factor 0.8
stator winding Standard No.6
temperature grade H
Voltage Regulation ±0.5%
Satisfactory normalization IEC600034,NEMA MG1.22,ISO 8528,CSA,UL 1446,UL1004B
  • Acrylic screen, improved wear and scratch resistance property;
  • Silica gel panel and keys can adapt well to higher and lower temperatures;
  • With RS485 communication port, it can achieve the "three remote" functions through MODBUS protocol;
  • Fits 3P4W, 3P3W, 1P2W, and 2P3W AC power systems (120V/240V), 50Hz/60Hz;
  • It can measure and display 3-phase voltage, 3-phase current, frequency, and power parameters of grid/generators;
  • The power grid has functions of over/under voltage and lack of phase; generators have functions of over/under voltage, over/under frequency and over current;
  • Precision measurement and display of parameters about the motor,
  • Control protection: Automatic genset start/stop, load transfer (ATS control) and perfect fault display and protection;
  • With ETS, idle speed control, preheat control, speed drop/rise control, all of them with relay output;
  • Parameter adjustment: Allows the user to modify the configuration and store it in the internal FLASH memory. Parameters cannot be lost even when power off. All parameters can be adjusted not only from the front panel, but also use the programmable interface (or PS485 interface) to adjust through PC;
  • Multiple temperature, pressure and fuel level sensors can be used directly, parameters can be user-defined;
  • Multiple crankshaft disconnect conditions (speed sensor, oil pressure, generator) can be selected;
  • Power supply range: (8~35)VDC, accommodating different volts of starting battery;
  • All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;
  • Add a rubber gasket between the controller shell and screen, the tightness can reach IP55;
  • The controller is fixed by metal fixing clips;
  • Modular design, flame retardant ABS shell, flush mount, compact structure and easy installation.
Electric Generator JP 60E

TECHNICAL SPECIFICATIONS:

LCD display (132*64)
Operation Panel Silicon Rubber

Language Chinese & English & Others
Digital Input 5
Relay Output 6
Analog Input 3
MFA

AC System 1P2W/2P3W/3P3W/3P4W
Alternator Voltage (15~360)V(ph-N)
Alternator Frequency 50/60Hz
kW/Amp Detecting & Display

● Monitor Interface LINK
Programmable Interface LINK

Maintenance

DC Supply DC(8-3
Case Dimensions(mm) 197*152*47
Panel Cutout(mm) 186*141
Operating Temp. (-25~+70)℃

Silent Type

Weight&Dimensions:

Electric Generator JP 60E
Depth Inches 96»
Width Inches Four. Five"
Height Inches 72»
Weight Pounds 3,800 approx.

Talk with us

You need Advisory?

Request your Electric Generator Here

×